Kenmore 64892 Electric Dryer "terminal block" Questions

Ad

Question about Kenmore Dryers

1 Answer

...terminal block where the cord goes through the back panel and connects to the wiring terminal power block, loosen the two screws on the cord clamp the clamp it to the back of the dryer just enough to ...

Ad

Question about Magic Chef Dryers

1 Answer

...terminal block, and found one side of the terminal block completely melted. Make sure that the dryer is disconnected from the wall outlet before doing any repairs on it. Electric dryer work on 240 ...

Ad

...terminal block model 7600ayw won't start. the terminal block terminal L2 is loose from the block. the wires are tightly attached. will this cause the dryer not to start? Hello, Very likely ...

Question about Amana Dryers

1 Answer

How to change a dryer power cord from three wire to a four wire cord? black to left screw on terminal block red to right screw on terminal block green and white to center screw on terminal block screw

Question about LG Dryers

1 Answer

terminal block exploded. The power cord has been attached and running fine for several months. The other 2 terminals seem un-affected and the circuit breaker did not trip. it of course recomended that

Question about Dryers

2 Answers

...terminal block. Red and Black wires of cord go to outside terminals of the three terminal block. It makes no difference which one goes on which terminal but I usually attach them so the color of the ...

Question about Electrolux Dryers

1 Answer

...terminal block Electrolux EDC77570W I disconnected the wires from the terminal block to repair pipe. But not sure where the blue wire attches to on the terminal block. Do you have the wiring diagram ...

...terminal block wire exploded. Need to replace entire harness and 4-prong power cord. Do I really need to replace the entire harness or can I buy a new terminal block and cut the black grounding wire ...

...terminal block apart and the stud that sticks out just came out of the block. I don't know what caused it, so I don't know if I should just replace the terminal block or if something else ...

Question about Maytag Dryers

1 Answer

terminal block support. Fold the ground strap over so both ends of the ground strap will be attached to the center terminal block post. Connect the neutral (white) conductor of the cord to the center

Not finding what you are looking for?
Kenmore 64892 Electric Dryer Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...