...igniter glows then the flame lights. Then the flame goes out and doesn't light up again. When it cools down and i restart the dryer the igniter glows and flame lights. i checked the thermostats and ...
Question about Dryers
glow ignitor works, but no flame ignites. ohmed out gas valve coil with wires disconnected = OL is it my coil? gas dryer runs. glow ignitor functions normally. flame ignites when i first turn on, but ...
...flame as the igniter was off. After several minutes, the ignition cycle started, but this time the igniter was brighter, the click was heard when the igniter was glowing and the gas ignited. As I ...
...igniter glows red gas valve clicks but no flame Hello, Since the igniter glows i am wondering if within 1 minutes does it go off??or does the igniter just stay on?? If the igniter just stays on and ...
Question about Whirlpool Dryers
...thermostat, igniter, flame sensor and coils and everything tests ok with the multimeter. I even have a new igniter and thermal fuse and still no glow in the igniter. Anything I am missing. Dryer ...
...flame sensor looks like 2) if the igniter does glow then go off but no flame..the coils that open the gas valve are bad here is what they look like The part numbers are; FALME SENSOR 338906 GAS VALVE ...
igniter glows but gas does not ignite igniter flame glows yellow,but gas does not ignite, no heat If the ignitor glows that means everything in the assembly is working and has continuity, so why doe ...
...igniter glows yet DOES NOT GO OFF followed by the flame is a defective flame sersor this is what the flame sensor looks likeIt is attached to the outside of the burner tube, Their are basically 2 ...
burner does not ignite First thing to check is the ignitor underneath the drum. (You have to open the panel to see it) It should glow shortly after the dryer starts, then the flame starts and the ...
...power to the valve. 2. The valve is getting power but not opening. 3. The ignitor is not glowing hot enough to activate the flame sensor. Usually it is the sensor or the igniter not the valve. ...
593 questions posted
Usually answered in minutes!
1,329 Questions
1,410 Questions
750 Questions
182 Questions
177 Questions