Kenmore 54501 Dehumidifier "dehumidifiers fans shut" Questions

DE 500P - Fan will not shut off My Delonghi DE 500P dehumidifies fine however the fan runs 24x7 and does not shut off unless the unit is completely shut off. This wastes a lot of energy needlessly. ...

just bought a new dehumidifier. does the fan just bought a new dehumidifier. does the fan really never shut off it should shut off when the compressor is not running. only portable a/c can have fan ...

just purchased a Danby dehumidifier (model # DDR6O11R). I was wondering when the dehumidifier reaches the programmed level of humidity (example: 40%). Is the unit suppose to shut off completely? I ...

Thanks OK.The problem then seems to be that when I select the dehumidifier mode, the fan does not shut off. Must be a fault in the circuit? I went back and rechecked. If the fan mode is selected, you ...

Kenmore dehumidifier 54501: Fan does not work. I Kenmore dehumidifier 54501: Fan does not work. I took it all apart and everything else turns on and operates until it overheats and shuts off. I didn't

The unit turns on compressor and the fan after awhile the fan turns off and compressor still on. Sounds like it is a bad fan or bearings. Try shutting off the unit as soon as the fan shuts off and see

...dehumidifiers are designed to have the fans run all the time and the compressor comes on when the relitive humidity rises above the setting that you have chosen. I spoke with the company and asked ...

Dehumidifier fan never shuts off. The only time Dehumidifier fan never shuts off. The only time it goes off is if I set the timer. But then it never comes back on even if the humidity is high. Is this

The cooling fan and will not shut off. theres a fan/compressor relay inside the case one side operates the fan and the other the compressor,if the fan side contacts weld themselves the relay cannot ...

kENMORE 70 PINT DEHUMIDIFIER Unit is 4 years old. When plugged in power goes on. However power button is not working to shut unit off/on. Compressor is working, but fan does not activate. Is problem ...