...and they said I need a service call. Any idea what the condition is? Wisco, this is a code for a overtemperature. You want to check the temp sensor in the oven. You need to ohm it out. Should read ...
...code displays with a audible beep until you press the clear/off button The F2 typically means an overtemperature conditions:1. over 650 degrees F unlatched or 915 degrees F latched.2. cooling fan ...
...peeping and showing F2. Does anyone know which fault this is indicating. F2 typically means an overtemperature condition. The cause could be welded relay contacts,a stalled or blocked cooling
...Thanks for any help ahead of time. tire, if your model starts with 911. the code stands for an overtemperature condition. I would start with the temp sensor, this is the probe inside the oven ...
Question about Ovens
Set to 'fan' and 180 degrees, the oven 'overtemperatured' to the extent that I could see a glow of the elements via the fan recess Is there supposed to be a over-temp/thermal cut out? What is ...
...open after a self clean operation. In some models, the cooling fan turns off too soon, causing an overtemperature condition that may also cause the fuse to open. You will have to remove the oven
I'm getting an beeping and a flashing F2 signal on the display. What is that? this means an overtemperature condition. ...
34 questions posted
Usually answered in minutes!
608 Questions
156 Questions
75 Questions
57 Questions
50 Questions
