Kenmore 22313 Bagged Canister Vacuum "power cord retractor" Questions

Power cord will not retract I have an Electrolux Renaissance, which I take very good care of and is going strong. The power cord retractor stopped working when the cord was fully extended and will not

...do I take apart the cord retractor unit on a Dyson DC20 to release power cable?sembly comes apart. The power cable is partially severed where it joins the assembly. here is a video that will help ...

...power cord continually retracts The cord never locks in place when deployed. The retractor button under the handle has no effect on cord. Cord retracts when button is pushed and when button is not ...

...power cord is fully extended and will not retract in Miele LUNA vacuum cleaner model s4580 Keep playing with it, it will go if you are careful.  The alternative is to disassemble the device and ...

...power for redundancy (good design!) It wasn't too dificult to pull out the cord reel, pull the reel off the axle while disconnecting the retractor tape, and adjust the contacts. yep, per the guest ...

...power/cord winder panel which pops off in an upward diredtion. and one is under the cloth filter on top of the motor, inside the bag compartment. Take out those 7 and lift the plastic top panel off

...power will not turn on unless I push the cord winder button at the same time as the power button. I have disassembled the vacuum and during testing, the power sometimes turns on intermittently if I ...

Power retractor not holding cord when pulled out to any specific length. Always wants to pull the cord back into housing. Would like to open the housing to see what might be wrong, but without a Owner

...power cord has screws under it and I am afraid of breaking the it. How do I access the screws under the pedal? That pedal is hard to break, use a large flat blade screw driver, stick it from the ...

...POWER AND ALSO WITH WEAK CORD RETRACTION. ANYWAY, GOOD LUCK TO YOU !!! Alot of these Hoovers has a panel on the top, near the back that has some screws to take out, then that panel comes off. The ...