Kenmore 73503 Stainless Steel Bottom Freezer Refrigerator "thin ice cubes" Questions

Ad

Ice cubes are too thin. Making on time, but no volume due to small cubes. What part will correct this? Ice maker is in a cabinet, would increasing the ventilation of warm air be of much help. The ice ...

Ad

Question about Scotsman Refrigerators

1 Answer

my scotsman ice machine makes thin ice cubes it makes thin ice rotated the ice bridge adjustment screw clockwise about a 1/8 turn in between freeze cycles. thich direction makes the ice thicker.

Ad

ice bucket you will see a thin metal arm sticking out the back. This thin metal arm activates whether your ice is crushes or cubed. With the ice bucket removed look at the back wall of the freezer and

Question about Refrigerators

1 Answer

...is running to ice maker as long as it use to cubes are half formed and very thin. Could it be the temperature? check your freezer temp and also if there is a water filter it might need to be ...

Question about Whirlpool Refrigerators

1 Answer

ice maker in a very thin state and almost completely hollow? I recently put a new water filter on the back of the frig and that when it all started. At the same time the cooper pipe at the point where

Question about Frigidaire Refrigerators

1 Answer

...thin shallow the ice maker in my refrigerator makes thin shallow cubes that indicates it is not getting enough water inthe ice mold most icemakers have a water adjustment screw behind the cover if it ...

Question about Sub-Zero Refrigerators

2 Answers

...thin ice cube problem without spending hundreds of dollars more. HI.CHECK FOR WATER SUPPLY VALVE WATER PRESSURE COMMING INTO THE UNIT,AND REFRIG SELENOID VALVE,IF THE PRESSURE IS OK ,REPLACED THE ICE ...

Question about Refrigerators

1 Answer

ICE MAKER ISN'T WORKING. WAS MAKING THIN CUBES AND NOW ISN'T WORKING Hi, Here is a tip that I wrote about the reasons why ice makers do not work. Ice Maker Problems and Ice Maker Troubleshooting ...

Question about Refrigerators

1 Answer

...ice thickness is too thin... turn the screw on the ice sensor IN or clockwise about 1/8 turn at a time till you get the right thickness...give it a couple of dumps before making another adjustment ...

Making a few thin ice cubes. Your water supply is not working at capacity, Check the valve that supplies it to make sure it is on or, close and open it fully to dislodge any built up mineral deposits

Not finding what you are looking for?
Kenmore 73503 Stainless Steel Bottom Freezer Refrigerator Logo

166 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Johnny 1000

Level 2 Expert

94 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...