Water dispenser dripping water all the time Hi, First be sure the refrigerator is connected to a cold water supply. After connecting the refrigerator to a water source or replacing the water filter, ...
...replace the water valve or a switch on the water dispenser. The way to find out which part needs replacement is to check the voltage on the green water valve coil when the dispenser lever is pressed ...
...need to replace inlet vavle. first check to see if valve powers up when you hit lever to recieve water. you can hear valve humm if not then replace micro switch above the lever inside dispenser ...
...Before you replace it, make it sure, there is no power at the solenoid valve. It located at the back of the fridge (where the water line is
Question about Refrigerators
water dispenser won't stop after lever released Water runs a 1/2 cup or more after lever is released and getting worse. water valve in dispenser in bad,, check with store for possible replacement
...pushing the lever. let the unit warm up slighty on the refr side and see if you can get water to flow properly. if not working after warming up, then you might have to replace the water inlet
Question about Whirlpool Refrigerators
...water dispenser I have a Whirlpool side by side model ED22DWXTN05 with a thru the door water/ice dispenser. The problem is that the water dispenser won't shut off causing water to overflow on to the ...
...water dispenser - which are usually combined into one assembly. Sometimes the electromagnetic coil burns out in one of them. The other possibility, which is less likely, is a bad mocroswitch at the ...
Question about Kenmore Refrigerators
...the lever. but most of the time it works fine. Your inlet valve must be getting weak and not sealing correctly. the inlet valve is where the water line ties in rear. replace it for the fix. ...
34 questions posted
Usually answered in minutes!
1,239 Questions
824 Questions
623 Questions
625 Questions