Kenmore 60654 Microwave Oven "changed transformer heating" Questions

...heating components of a microwave r the diode, magnetron, and transformer. checking a unit plugged in can be dangerous seeing there is about 5000 volts from the step up transformer. if you have a amp ...

...changed and repaired the connctors (white wire on the high voltage transformer ) need to open the microwave to find this. It's been replaced at least 5 times in the past year. It burns, overheats ...

Microwave HV Transformer Melted My 2yr old over the range microwave started smoking at the top the other day (still heats up fine). I unplugged it, unbolted it and opened up the microwave to find that

GE JVM 2050BH001 does not heat but everything else works I've had this microwave over for 4 years and has worked flawlessly until now. All the lights work, touchpad, turntables, and fan but it will ...

...changed the high voltage diode, still not heating. any ideas ? In my limited experience magnetron failure is common but testing is not easy or safe. Anyone reasonably competent can check that mains ...

Kenmore over the range microwave My microwave doesn't heat and has a loud hum and I can smell somethign burning. The resistance readings on the transformer appear ok. I have replaced the high voltage ...

everything seems to work but not heat ge microwave oven jvm1650. every thing runs (fans blowers lights ) but will not heat. tested door switchs ok except monitor switch when connected has o ohms when ...

...output, the tension is very high ~2400V !!!
If at the transformer input there are the 220V (Europe) but the oven still don't heat, the magnetron (m.w. generator) is burned out and must be

...transformer bad, and if so has the replacement part changed from RTRNA535WREO to RTRNA527WREO? Also, does continuity on the magnatron indicate no problem there? I would not recommend an inexperienced ...

...heating. The transformer and capacitor check good. I believe the magnatron is also good. Any suggestions? If the cook light is working and there is power to the transformer, DON'T try to measure the ...