Kenmore 62702 Microwave Oven "vent cover model" Questions

...vent cover broke in half. On our model it was a silver piece of cardboard that covered the air vent. Is this a vital piece? Nothing covered in manual. ...

...cover located behind the grill vent. You can remove that grille vent by removing the 2 to 4 screws above the grill vent. Then either slide the grill vent 1/4" to the left to remove it, or else ...

...vent cover above the door keeps breaking off. The first one I had I had to replace the vent cover twice, and on the third time it broke Sears just replaced it. Yesterday the send microhood's vent ...

...vent to the left. From page 36 of the online version of the owner's manual, which also mentions the active grille's presence on some models: Oven Light Replace the burned-out bulb with a 120 volt, ...

cover that the vent door conects to is broken. It is not obvious how the plastic cover is attached but I'm guessing it is just snapped in. How do I remove the plastic cover?... thanks Be sure the oven

...cover, replace vent grille, and secure with screws. Cooktop light: The cooktop light bulb is located on the underside of the microwave oven, and is replaceable. Remove bulb cover screw, and open the ...

...directions in the manual, but the vent cover does not tip forward or lift out. If it is plastic vent cover there should be 2 screws apporx. 4 inches from each end,remove them tip top out and lift

...require that you take the cover off the top and put it on the back. There will be a plate on the top covering the vent hole, just take it off and place it over the vent hole on the back. Please ...

vent fan relay are probably welded together from all the use over the years. May/may not be able to replace it. Some models have a removable cover, you could try to remove the cover, free the contacts

...vent frame on. Please help? I have the same model. There are 2 sscrews that hold the grill cover on. One problem might be that your cabinet are covering those screws. They are both located about 1" ...