Kenmore 62702 Microwave Oven "clock fast" Questions

...clock radio runs too fast and continually gains several hours per day- how can I fix this? I have had this clock for many years and never had an issue before. Any thoughts on how to fix it is ...

fast and the clock on microwave is running to fast Sounds like the microwave thinks it is running at 50Hz. They sense this automatically. most of the time a reboot will fix it. worst case, replace the

...fast, no matter how much time we enter. No cook action. Everything else works; interior light, exterior light, exahust fan, clock. The first thing I would suggest is a hard reset. Unplug the unit for ...

...clock and time are 10 seconds fast per minute. The first thing to try is a "hard reset". Unplug it from the power line for a minute, plug it back in, set the clock, then try again. Let us know if the ...

clock face (Reloj). Then press the touch pad labeled Inicio/Inicio Rapido (Start/Fast Start). Type in the 4 digits of the current time (24 hour format). Then press Inicio again. (Note: I have left off

clock is correctly telling time and the micro is fully operational. This is often just a bad connection on the bottom of the noise filter board. Look for burns and ring cracks. See the attached photos

is running fast. It counts down 1 min in 5 sec. Clock and other functions appear to be working ok. The unit is set in demo mode, Check your owners manual for instructions to get back into regular mode

...you If the clock runs fast, a minutes only last 40-45 seconds, and the oven works ( heats up ). Try flipping the circuit breaker off for a few minutes, then re-energize the circuit. Worked for

...clock runs fast about ten ins per day. Tried hard reset no change. What might be next fix? Jim REturn it An oven designed for 50 hertz AC power will have its clock run fast if used on 60 hertz power. ...

...clock runs fast Frigidaire clock runs fast Assuming you're using it in the US and it's not set via the controls for operation on 50Hz, then it may just need a hard reset. To do that, you would unplug ...