KitchenAid 31 in. KGCS105 Gas Cooktop "stoves burner knob turn" Questions

burner (since that knob is "off") the RR burner doesn't light. In order to light the RR burner, I have to turn RF knob to "spark" and simultaneously turn on RR burner. The unit is 3 yrs old and the RR

all 4 ignators are spaking with the contrtols on off position on my GE JGP328 cook top It's the Switch Harness. Do not remove the stove and disconnect it from the gas. Turn the gas off under the stove

knob again and the burner was still on. I unplugged the stove from the wall for about 10 minutes. When I plugged it back up to the wall, the burner came back on. The dial is on the off position. if it

...KNOB JUST BEYOND THE START POSITION AND IT SHOULD STOP. IF NOT UNPLUG THE STOVE AND FIND THE IGNITOR ON THE BURNER HEAD AND CLEAN IT WITH A SOFT TOOTHBRUSH. PLUG THE STOVE IN AND IT SHOULD STOP ...

...burner. I took the knobs off to clean them and now can not get one back on. The underlying post the knob fits on turns without clicking to the stop/off position and the white post(?) that goes on the ...

...brass spindle inside the knob is not gripping to turn it right down, also check your l p gas pressure it should be 2.75 kpa. if the flames are big and yellow it's getting too much gas, not enough

...burner knob down to start the flame. How about the reverse, the burner lights, the ignitor clicks off but starts attempting reignite again even though flame is on. Any probable solutions to this ...

i have a 36" model with 4 burners and grill, the grill and two right burners work fine but the left two burners when either knob is turned nothing happens. the ignition does spark on them but when the

...knob and have the flame not go out. Lift the top of the Stove up. Look for a Small line that goes to the Affected Burner. At the end of that Line you will see a small Flathead Screw. Turning That ...