KitchenAid KUDR01TJ Dishwasher "top arm not" Questions

...top spay arm is working ? Ensure that the spray arm is movable. Inspect the spray holes in the top spray arm. If clogged, clean the openings. If no clog, position the spray arm in a certain position ...

...top spray arm, also make sure that all holes are open. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure is not low. under the screen and you'll need a Torx ...

...top spray arm. make sure the setting washer is on does not preclude the top spray arm from operating(read manual). If not check arm by spinning by hand to make sure it is free. If arm is free and it ...

...top tray - which spray arm do you think is not working properly? 1. Top 2. Bottom 3. Both 4. Something else The broken bottom arm is probably preventing any water / water under pressure to get to the ...

...top of the dishwasher do not spin. These spray arm will only get water several times in the wash and rinse cycle. They do not turn at the same time the lower (bottom large spray arm under the bottom ...

...top shelf spray arm does not spin. I have check for obstruction - found none. All parts look good. Lower arm is spinning. Dishwasher is filling with water to proper level and working properly except ...

top spray arm Hi Please check if something is blocked near the top spray arm, also make sure that all holes are open. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water

...top and then cycles. If water comes out arms but arms won't turn, check all holes in arms. It's the water spraying out these that causes arms to turn. If arms spin freely by hand, it's a plugged arm ...

...arm in top does not spin Hello bue.... The top arm spins due to water pressure. pull your top drawer out and inspect the rubber tube that feeds water to the top arm. Usually they have a split in them ...

...top spray arm and see if it moves freely. Inspect the middle part of the spray arm. Sometimes a tall dishes can prevent the arm from moving. Put the spray arm at 12 o'clock position and have a cup ...