...cold stem. Danco does make them. Ask the retailer where you purchased the H/C stem. I hope this helps.. remove the c clip (may be plastic or metal) on the top of the replacement part, the stop ring ...
Question about Home
...cold valve stem outlets of the brass tap manifold in behind the wall.get a flashlight and shine it into the two holes(hot and cold outlets where you removed the valve stems from{where the handles ...
...replaced a one handle Moen shower catridge. The old cartidge turned from right to left, cold to hot. The new cartridge turns right hot and left cold is ther somthing else I need to do to make it turn ...
...cold water off I replaced the hot and cold water knobs but it still leaks I didn't change the washers what is causing the problem replace the seats in faucet body -a special wrench is usually ...
...Cold water coming out of shower/tub. Replaced the Moen cartridge and still, no cold water. When knob is turned right I get hot water when turned left I get a trickle of hot water.????? Hello Take the ...
...cold. Phillip screw or allen nut back of handle. You will see a brass valve stem the handle was attached to. Use a crescent wrench and unscrew the stem and pull to remove. Ar the bottom of the stem ...
cold water on my Delta double hand faucet is leaking. I replaced the spring and rubber seat. when I put it back together, i can not turn the water off with the handle. I took the stem assembly out and
Question about Delta Home
Replaced delta stem/spring and gasket in hot and cold sides of a double handled shower. When turning the handle cold back to the stopping point lets water out like its being turned on? check that the ...
60 questions posted
Usually answered in minutes!
50 Questions
7 Questions
2 Questions