Question about Moen Home
...in moen single handle tub &shower faucet reverse hot & cold water After installing stem cartridge the hot and cold water changed sides why remove and turn cartridge 180 degrees then ...
hot water will come out of either faucets. Their seems to be plenty of hot water pressure up to the faucets but none comes out. Could we have messed up in the installation? Thanks, Ben Sounds like the
...hot water come out need to adjust anti-scold when unit shipped is set for cold if u have install paperwork that has info on how to adjust if not remove handle and on valve stem will see blue and red ...
...hot water when you open the valve and that this is for a single handle control shower fixture. If so either this is the wrong valve for your shower control or it is installed backwards. Sometimes the ...
hot and cold. Phillip screw or allen nut back of handle. You will see a brass valve stem the handle was attached to. Use a crescent wrench and unscrew the stem and pull to remove. Ar the bottom of the
...have a tab to keep the valve handle from spinning. Also, the valve can make the hot water either left or right depending on whether the valve is turned up or turned down before you install the
Question about Delta Home
...hot and cold sides of a double handled shower. When turning the handle cold back to the stopping point lets water out like its being turned on? check that the stem was in the central position before ...
...do the best you can to clean out inside valve. Make sure you apply grease to new valve. If water is backwards after install of new valve, hot on right, remove valve and turn 180 deg and
...hot water I have a single handle delta faucet in my shower. When i turn the shower on,the water never get hot enough to shower in.There is plenty of water pressure, is there an adjustment I can make ...
60 questions posted
Usually answered in minutes!
50 Questions
7 Questions
2 Questions