Moen & One Handle Tub & Shower Faucet  "remove single cartridge" Questions

remove single knob shower faucet cartridge Take handle off (either set-screw from side or bottom of handle, or phillips screw under cap on end of handle), pull off sleeve that's behind handle, unscrew

...single cartridge from single faucet shower I have removed handle, chrome outer ring and retainer clip. I've tried pulling on cartridge stem but cartride will not move. Is the cartridge being stubborn ...

single lever faucet. I've removed the lever, but can't seem to remove the inner workings to get at the cartridge. It turns but doesn't seem to loosen no matter how long I turn. What screw is it? http:

...single handle. I am not familiar how and what to replace. You need to pull and replace the cartridge on your shower valve most likely. It varies by Make and Model, but generally, remove the handle, ...

...Single Handle Shower faucet can't get cylinder out I have removed the slining keeper clip from the top bur the stem cylinder is frozen in and I can't get it out New moen cartridges for tub/showers ...

...single lever kitchen cartridge out How do I pull a moen single lever kitchen cartridge out that is old and stuck?I removed the horseshoe shaped clip. When I pull the valve stem, it doesn't budge. ...

...remove.It is a single handle faucet and I tried to pull straight out but something catches and prevents it from coming out hi, there is a lock nut that holds the cartridge in this will need to be ...

...single handle faucet in my tub Remove the shower control handle. If the cartridge is threaded there will be a nut on the top. Remove with a crescent wrench. If there is no nut then there will be a ...

single handle moen bath fixture only lets out hot water remove the cartridge and see if their is anything blocking the cold inlet.If you dont see any dirt than that means that the cartridge needs to ...

...single handle shower and does not pull or push only turns You will need to remove the old cartridge from inside the shower valve body and either refurbish it with new rubber seals and O rings or ...