...at 42 to 44 inches and the shower arm at 74-78. You want it I usually rough the tub and shower valve spout at 4" above the tub rim, shower valve 10" above the spout. This is for tub and shower
...3570 shower valve. I need the rough plumbing instructions. call moen they will send it out usually at no cost ...
...rough in valve is installed correctly with the word up, up Sounds like the delta people forgot to install the diverter piece inside of valve body,small white plastic piece screwed into valve. If you ...
Question about Delta Home
...rough-in valve in the wall. Sometimes the seal in that comes apart and blocks the water. Get new stem for valve. Unscrew the nut, replace stem, tighten nut. Clean inside valve before u put new one
...rough-in valve it is all good. Reinstalled it did same thing. Went back to where I purchased they suggested it might be a bad cartridge. Purchased a new one installed it and it does the same thing. ...
rough valve is also Jado. On the cartidge there should be a little stopper on the stem that sticks out where the handle goes on ( this prevents the handle from going all the way up ) try repositioning
How do you connect from Grohe universal rough in to dual ell for hand held/tub spout If you are going to have both you are probably going to need an optional diverter valve. Luckydog
Trying to install a Delta shower rough in valve The pre-existing wall valve is totally different. What do we do with ports not being used? Are you installing a R10000 or R11000 diverted?
Question about Home
...rough-in valve, you may want to check that. Also, if it is installed upside down, you can try to pull the cartridge, flip it and reinstall it. That does not work with all cartridges, but it is worth ...
474 questions posted
Usually answered in minutes!
37 Questions
5 Questions
4 Questions