KitchenAid Superba Architect KSCS25INSS Side by Side Refrigerator "remove ice maker unit maytag" Questions

...ice maker shoot door does not open Everything works. The water flows, the ice maker makes ice and stops when needed... but the door will not open for individual ice. Is there an actuator for the ice ...

...service. Hello Where the water comes into the ice maker.Be sure it is not frozen up.If it is, remove ice with a hair dryer. Also,reset ice maker by lifting full ice tray arm and putting it back

...remove the ice maker. Having removed the cover you will see a white gear with a plastic shaft in the center. 2.) On the right is a metal wire arm for turning the ice maker on and off. Put the arm in ...

...the fill process overflowed the unit. the water then froze the drain and all overflowed water from icemaker. Remove icemaker and remove all ice from freezer and icemaker. Clean all drains.

...ice maker seems to be functioning properly. sjlobo, sounds like your defrost drain pan is frozen over or has some gunk in it. When the unit goes into defrost the water is running onto the freezer ...

...ice maker starts cycling remove the wire and watch for it to stop listen for the icemaker valve to open if the ice maker finishes and the valve didn?t fill replace the water valves if the icemaker ...

ice up in the unit. I cannot remove this unit, even though I pull back on the tab on the left-under side. I believe this is the release for the unit. I feel that the unit and end of the water line may

...ice maker arm on mine and the creaking went away. I never suspected the ice maker. My ice maker was creaking non-stop for hours, even with the arm up. I removed the front cover and it appears that it ...

...remove the back, the metal freezer unit is a solid block of ice. possibly the drain is plugged or  the drain line, which runs down from freezer on back of unit, to the drip pan underneath. U can ...

...ice to fall into glass You will need to replace the fountain kit , pt # 12001991 . If after dissasembling , you find the plastic bracket melted , it too , should be replaced , pt # 61003407 . Remove ...