KitchenAid Superba Architect KSCS25INSS Side by Side Refrigerator "kitchenaide dispenser panel removal" Questions

dispenser mechanism to repair/replace it? remove the bottom tray that you sit your glass on, push down on the bottom of the trim arround the despenser, lift outward then upward on the trim panel, have

...of the panel. Use a screwfriver to pop this out. You will have to unscrew the electrical panel to expose the dispenser area. Be wure to unplug the unit first and be careful not to break any

...It sure would've been easier if I could've removed the face plate to the control panel to get access to the problem underneath. I hope I solved your other user's problem with the water dispenser. ...

...dispenser panel to get to water dispenser switch Depends on the brand. On most whirlpool and maytag styles, the trim that goes around the dispenser area is only clipped in. If this is your style take ...

...dispenser on our Kitchenaid Superba side by side refrig needs replacement. Easy! Right? However it is screwed in so tightly and the location is behind the panel is so small, it it very difficult to ...

...panel, there is a whirring noise but no ice. Water dispenser works fine. I have removed the ice storage bin in the door and cleaned it thoroughly.Everything seems in good condition. Please give ...

dispenser is not functioning. Bought 2 replacement bulbs from a parts store for this model, but they aren't working. I suspect a short somewhere but don't know how to get inside the door panel to see.

I have a KitchenAid SxS model # KSRG25FTST01 with an icemaker problem. It stopped making ice, but the water still dispenses. It makes no noise and no water in the ice tray. I never hear it try to fill

...dispenser is working. switch is on. ice purchased at store stays frozen hi.. You will need to unplug refrigerator and remove the rear panel in back of the freezer. Look to see if the evaporator coils ...

...panel (touchpad) of the dispenser is removed to access the dispenser components. If there are no screws, use a putty knife with the end wrapped with tape so the paint on the door panel is not ...