working if not check power - step down supply, the pads are responding- if not faulty pads- or the door switches, if the switch contact are not good then it will not trigger the processor to switch on
...working fine. Sure this is the failure off the unit but make sure that the step down transformer for the power to the unit is faulty or burnt. If so replace the transformer. If power goes tto unit ...
...working find the breaker for the oven turn it off wait 30 sec or so then turn it back on yep some times even that processor in your oven needs rebooting and no I don't think Bill Gates is to blame ...
working properly The power went out the other day and now the keypad does not work properly. For instance when you try to reset the clock the numbers on the keypad do not work, as well as when you try
...processor (onboard watchdog) checks to make sure all functions are in working order and all switches are in the default position, ready to use. If it works for you please take a second and rate the ...
...the buttons for a key press. By using a matrix for switch input, many buttons can be read by the processor using very few wires. The unfortunate side of a switch matrix is if any one wire becomes ...
...working fine and then all of a sudden the the whole thing just shut down. none of the buttons are lit up. i cant do anything. the door remains locked. i thought it was the circuit breaker. i replaced ...
...to add Heat-sink compound between the thermostat and the sheet metal. This is used for computer processors and is available at computer and electronic component stores. 3) An 'airstream type' ...
working and that the contacts are not oxidised. If they are, just scrape off the oxidised with a screwdriver. If that does not work, it could be a faulty control panel, which will need to be replaced.
44 questions posted
Usually answered in minutes!
102 Questions
26 Questions
27 Questions
