...door" error message shows up while using oven. turns the temp off. Have tried opening and closing the door and turning the temp on and off as solutions You need to find out what the oven manufacturer ...
...Showing as F9 on display, and can not open the door on machine. So F9 would explain why your door latch isn't unlocking since F9 means your door latch has failed to move. Ok so it sounds like your ...
...oven door to relieve pressure. If this does not work try selecting self-clean mode again and then cancel it. If none of these work you will need to replace the lock latch assembly. Hope this helps. ...
...oven door locked and the code F2E0 showing and here is what I found!! When I tried the clean cycle the locking solenoid would try to engage ,or disengage if I tried to cancel , but the door would not ...
...oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope ...
oven door locked The range made a buzzing sound and noticed that the clock reset to 12:00 AND immediately LOC came up on the display the oven door was locked. I pressed clear for 3sec and it continued
Question about KitchenAid Kitchen Ranges
...showing an error message 5A 66 That is probably the SAbb code; the Sabbath mode has been set. This mode allows you to heat a meal while fulfilling the "no work" requirement for strict observance of ...
...door open = switch open small low voltage terminals). Replace switch if defective. 4. Measure latch switch (unlatch = switch open, CAUTION - oven light contacts are closed). Replace switch if ...
Question about Frigidaire Kitchen Ranges
...door can't close, the oven can't work, please help me. thank you I appreciate your post, Haozhen! From what you have described your Frigidaire range is displaying an error code of "F90" and your oven ...
284 questions posted
Usually answered in minutes!
269 Questions
105 Questions
116 Questions
75 Questions
64 Questions