...bowl handle and press to the left with your thumb on the extension of the cover that goes over the top of the handle.Remember that the pusher MUST be removed from the cover to do this because of the ...
...bowl handle facing front, make sure bowl locks. Put lid on with lid lined up with work bowl handle. Put pusher sleeve into lid's feed tube, with metal element facing the front of the food processor. ...
...bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel. ...
bowl handle doesn't make connection it appears that the spring is sprung on the needle in the handle that makes the connection to turn on the processor. I wonder if I can take the handle of the bowl ...
...bowl into place, use the tip of a knife to press down the little switch in the opening where the handle used to be. I've been using mine for 6 months this way after KitchenShop stiffed me on a ...
...bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel. ...
Question about Robot Coupe Food Processors
handle of the bowl has a safety mechanism consisting of a plastic spindle with a magnet at the bottom it. The spindle is locked into the handle of the bowl by a plastic collar. I can't work out how to
...handle that holds it all inside gets loose making the pin at the bottom of the bowl not reach where it needs to be when you put the lid on. If you assemble the unit and squeeze the top of the handle ...
...bowl handle The bowl is a one piece item, not able to be pulled apart and with no parts available for it apart from a complete bowl. The pin will not be just dislodged, it will be broken off from ...
62 questions posted
Usually answered in minutes!
22 Questions
25 Questions
13 Questions
12 Questions