low speed noise Machine makes a strange grinding noise but only on low speed. It works and sounds fine on higher speeds. The governor looks ok/ Check that the nuts under the back cover at the sides ...
low speed, noise problem appeared. And it seemed as though something was banging or hitting bowl at regular intervals. Problem though is with motor, since the presense or drag of the blade and bowl in
low pitch squeal. There is no noise at higher speeds. What should I look into for repair? I think you have a K45SS. It sounds like there is a problem with one of the gears, probably the worm gear. The
...noise (think disuse caused motor lubricant to thicken). Propped it upside down and put drops of quality machine oil at seam where narrow blade shaft enters larger shaft (in center of curved guard). ...
Question about KitchenAid Food Mixers
...the worm gear and inspected the other gears and they do not appear to be damaged. No grinding noises, motor sounds normal. Speed selector functions normally. Could something inside the motor ...
Question about KitchenAid Food Mixers
...noise and seems to be coming from around the governor or the control plate. I've had the mixer apart and have checked the gears which seem to e fine - it has been re-greased too. The mixer is ...
...noise when in use, and the lowest and highest gears don't work. Machine is about 20 yrs old. This sometimes happens when the two nuts holding the motor in place become loose. To check, open up the ...
low it makes a really loud grinding noise the higher you turn up the speed the slower it becomes. It sounds like the Worm Gear is going out. The faster the motor runs, the more damages the Center Gear
...noise now. What can I do to fix this? Get a Copy of the Repair Part List of your model from Kitchenaid.com. Most likely it is the Worm Gear (17) grinding at low speed the Worm Gear Follower.(19) You ...
noise, even on low speed it is turning at hundreds of revolutions per minute so you will only get a whirr not a knock. Most common knocking is the plastic fuse gear missing a tooth or two. That is the
72 questions posted
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
205 Questions
183 Questions