...mixer will only work on high speed why Speed controllers reduce the power provided to the mixer motor and have to "soak up" some of the power not used. If the mixer was used on low speed but heavy ...
...high speed I just downloaded the KitchenAid service manual from http://www.mendingshed.com/kitaidparts.html In that manual, on page 13, for the problem "mixer runs at full speed", two possible causes ...
Question about KitchenAid Food Mixers
Mixer only operates at high speed regardless of the speed setting It appears the speed control is not working. Is this a common problem? the triac solid-state component on the board for the motor ...
Question about KitchenAid Food Mixers
...mixer runs only on high speed it is caused by the control plate adjusted incorrectly or the control plate spring unhooked. Remove the trim & end cover on the mixer and check the control plate ...
...mixer, we have used it once and the loud high pitched sound is very irritating. Is this a problem that will go away in a short time, or do we send it back for repairs? Our daughters all have 5 quart ...
Question about KitchenAid Food Mixers
K5-A model only runs on high no matter what speed set to I have an older 300 watt lift bowl model K5-A. It only works on high, no matter what speed you set it to (1-10). Is there something I can do ...
...high speed because the phase control board went out, your fix may not be absolutely 100% and it is now causing an uneven distribution of the electric charge in the mixer and it is arching. My ...
...mixer shorted and requires repair I have an old kenwood chef. Was working very well until last week, went on high speed for a while and the suddenly loud sparks and smoke. Switch off immediately. On ...
...mixer is slow and doesn't respond much to the speed selector. Are you mixing at a high speed. For bread, you shouldn't go above a '2' setting on most of the mixers and keep the time fairly short -- ...
mixer run on high at all times The mixer run on high at all times If your mixer only runs on high speed there are 3 things that can cause that. The first thing to check will be the speed control plate
255 questions posted
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
183 Questions
89 Questions