KitchenAid K45SS Classic Stand Mixer "trim band" Questions

Ad

Question about KitchenAid Food Mixers

1 Answer

...band came off my KSM90 stand mixer. How do I reattach it. The silver trim piece on you mixer can be reattached by taking the back off your unit. once this is done you will be able to see two screw ...

Ad

...supplied the model number, that is the part number for the silver trim band that goes around the motor housing. Also as well as the model number a rough idea of how old your mixer is may be

Ad

Question about KitchenAid Food Mixers

1 Answer

trim band. If you are up for a small job knock the chrome trim ring around the planetary off and clean it out and wipe around the area it covers. It is called a drip ring for good reason, you may find

...trim piece says "Custom 6" on it, and says it was made in St Joseph, MI. Stats: Mixer bowl is 9.5" in diameter, and 6 5/8" tall. No markings on bowl or mixer other than what I have mentioned. It is a ...

Question about KitchenAid Food Mixers

2 Answers

...band, this is where the two halves join. Undo any screws holding the halves together. Remove the pin holding the planetary in place. Remove the trim disc. The planetary assembly lifts out but you may ...

Question about KitchenAid Food Mixers

1 Answer

...think the most likely thing is a loose screw or two. Take the trim band off, 1 screw. Then take the 4 screws that hold the cover on. You can now lift the top and take a look for the sourse of the ...

...trim band with the writing on it. Get a multi meter and follow the power. Where the power stops is a good place to start looking. I think the electric internals consist of a PCB complete and a motor ...

Question about KitchenAid Food Mixers

1 Answer

trim band around the mixer. This will reveal 4 screws which hold the top cover on. Remove the screws and lift the top off. Find all the screws which hold the gearhead in place and tighten them all. If

...trim band (one screw at the back) that exposes 4 screw heads where the top cover joins the gear case. There are 4 screws from the top that retain the planetary assembly. I can't remember if you need ...

Question about KitchenAid Food Mixers

1 Answer

...band, this is where the two halves join. Undo any screws holding the halves together. Remove the pin holding the planetary in place. Remove the trim disc. The planetary assembly lifts out but you may ...

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

613 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

194 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...