(fuse gear) you say no teeth broken 2) Worm gear not broken but whole unbroken plastic part not gripping aluminium boss 3) Pin through worm gear broken or missing 4) Pin through centre (or bevel) gear
Question about KitchenAid Food Mixers
...gear in a Kitchenaid Professional 600 mixer I got the snap ring off, not I can't get the pin out that holds the worm followr gear on the shaft. It apprears that the pin is crimped on both ...
Question about KitchenAid Food Mixers
...Mixer Planetary becomes sluggish when met with resistance. The planetary on my Kitchenaid mixer spins just fine until it is met with resistance, then it slows right down and has a really hard time ...
...the key on a hobart slicer? What is the model number? the gear has a cover cap - pryed up with a pin or needle, a screw is beneath, easy removal - getting a replacement gear is a ...
KitchenAid Mixer struggling to spin? I have a 4 year old professional series kitchenaid mixer. I was making bread and it stopped working. Opened it up to see if the worm gear was stripped and it was. ...
...Please help. Thanks. I have the same problem. Can anyone tell me how to remove the retaining pin? Check out the Kitchenaid Repair Clinic for help on this. I found some instructions for doing ...
...a bit you can wiggle the follower gear by hand and it will come up. Then you can see there is a pin holding the drive gear underneath it in place. The pin in my mixer was actually bent (must have ...
...I thought I had a broken worm gear so I tore it apart and found the worm gear roll pin was coming out. Cleaned it up and put a drop of Loctite on the pin and reassembled, has not ...
Question about KitchenAid Food Mixers
...part where I can get to the compartment that houses the gear assembly. I have remove the main shaft pin but still cannot get to the five screws underneath the orbital piece. Maybe if I could see an ...
...downward pressure is applied to the switch, it'll spring. Attempted to take it apart, but the roll pin won't come out. Gave up for now and reassembled, now it won't spin when turning it on. Motor is ...
457 questions posted
Usually answered in minutes!
493 Questions
285 Questions
205 Questions
183 Questions
89 Questions