KitchenAid KEMC377K Convection / Microwave Oven "need lubricate" Questions

...have been touching some wires or the bushings may need lubrication. you have to bring it down again, remove the fan and bench test it . lubricate the bushings if necessary. tnx 4 using fixya, ...

I purchased a panasonic nnsd797s inverter microwave in Febr 2010. The turntable appears to have been the source of noises for the past few months. It quited down for a while, but is not louder than ...

...lubricate them. (I've kept my worn-out turntable ring going for over 10 years by doing this.) If the turntable has a central post through the floor of the oven, the bearing may need cleaning and ...

...spillovers or lack of lubrication ( they usually go for years tho) If mechanically minded you will need to remove the glass cooking plate, REMOVE THE POWER CORD, turn the whole thing upside down to ...

...se there is no real adjustment, but the linkage that holds the two nylon hooks on the door in may need to be lubricated with some lithium grease made for nylon or neoprene parts. The sliding ...

...spout is part of the spout. The cylinder is sealed with o-rings at top and bottom. They probably need replaced. Feel free to use lubricant.

How do I fix the microwave? There is a squealing sound just after the microwave starts and before it really gets going.Serious?? The fan motor bearings need lubricant.

GE model JVM1790 makes noise at startup GE model JVM1790 has a fairly harsh vibration on startup. If using a lower power it makes the noise intermittently. This in happening concurrent with the ...

screech in microwave it can only be the fan motor. If you can get near it, you might be able to spray some lubricant on it. Either way, probably needs replacing as the bearings do wear out over time..

...wondering if it is about to blow up ? Sounds like the gears have started to grind and meshing and need lubricating! I would suggest taking the cover off and blowing the inside out then look for any ...