Krups 572 Power Xtreme VI Work Top Blender "removing tight blender bottom" Questions

Ad

Question about Cuisinart Blenders

2 Answers

...tight with a bench vise to be able to remove the clutch. Hope this helps. -Vince Remove 3 screws on the bottom of the blender Pull off cover Use a screwdriver to keep the motor's shaft from spinning ...

Ad

Question about Cook's Essentials Blenders

1 Answer

bottom piece that holds the blade was screwed on so tight that I can't remove it. Any chance you'd have a way to remove it? go to a good hardware store and buy some devices known as EASY-OUTS they are

Ad

...tight. When the latter gets loose, the blender shakes and leaks. To fix it, first you have to remove the top nut holding the blade on. I had to get in there with pliers, but a ratchet with an ...

Question about Krups Blenders

2 Answers

...blender won't work again until you replace the fuse but otherwise it should be fine. The fuse looks like a white diode and it will be attached tightly to the motor with a nylon strap (so that it can ...

...blender for about 10 years now and it has worked great. Recently there has been a black dust/stain/residue that is on the underside of the bottom collar/blade and on the base itself. I have tried to ...

...blender you should see a steel rod with a groove in it. this rod will run all the way to the top and be connected to the rubber gear drive on top. get a firm grip on the rubber gear drive with your ...

Question about Euro-Pro Blenders

1 Answer

Blender. -Possibly not the spline plastic. -Inside on top of the motor there is a planetary gear there. Possibly worn out or lose screws as well that not hold it in place to mesh together. -But before

...Blender I ordered a replacement clutch assembly but can't figure aout hou to remove the old one. Can anyone help? Remove the little rubber feed on the bottom of the base (they might be glued a bit so ...

Question about Cuisinart Blenders

2 Answers

...blender won't work Use this infrequently & have had no problems. Went to use it last night and it won't work. The red indicator lights come on and when you it a button the timer starts to count ("1), ...

Question about Blenders

5 Answers

...blender). Then once that's nice and tight tighten the flange that catches the blender teeth to the remaining portion of the protruding threads. Make sure you use the copper colored gasket first then ...

Not finding what you are looking for?
Krups 572 Power Xtreme VI Work Top Blender Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Krups Blenders Experts

Ross Keen

Level 3 Expert

1364 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Jeff Bird

Level 3 Expert

1345 Answers

Are you a Krups Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...