...Tighten that real good and you should be good to go. To check if you've done it right spin the flange. If the blades spin independent of everything else you're good to blend away! this was great! One ...
blender jar leaks Check the blade assembly if it is loose tighten it up. If it is worn out or cannot be tightened up then buy another jug complete with blade. If it is the glass jug model then the ...
tighten it, the blender will work for maybe one more task. Exact same problem. Turned out the threaded shaft that holds the blades was broken so tightening the nut on the top doesn't really help. Just
the nut that holds the blade is loose and liquid gets through it. When I tried to just tighten the nut is spins but does not tighten. Is there a trick It sounds like the blade has overheated at some ...
...and can be moved to a new jar/carafe. Or the blade assembly has come loose a little and need to be tightened or some the washers (usually the rubber ones) have worn out and need to be replaced.
...was filled with liquid and all liquid leaked out the bottom onto the counter top. Siobhan clean and tighten blade --if still leaks replace seal or need replacement base if ...
...ran out of the bottom of the pitcher and all the lights on my blender started flashing. I've tried tightening the blade, but it doesn't seem to tighten... I think I'm going to have to call ...
Question about Blenders
...appears to be working fine. The blades may not be turning because the blade assembly is not fully tightened onto the blender bottle. Another reason could be that you are not putting the blender ...
...the blade was not turning. I plugged out the machine and turned the glass container upside down to tighten the bolt underneath the blade but I could not seem to tighten it, as bolt was very loose. ...
2 questions posted
Usually answered in minutes!
57 Questions
26 Questions
22 Questions