Pramac GBW30P Encl Diesel Genset w/Perkins Eng "generator low voltage alarm" Questions

voltage charge battery or change if too low , if O.K. check all wires from battery to starter.If O.K. try voltage at the starter if that reads o.k. check the starter solenoid if it cranks when jumping

generator and after starting, will run to high revs and then shut down, the code on the display is U U Any advise, my gas pressure in is 8"wc. Your gas pressure is too low and you may not have a large

low battery light come on because the 2 sec of cranking lets the voltage get lower than the alarm threshold. I'd connect a spark tester to either of the plugs and try a manual start, if you see sparks