American Standard 1748 5.5' x 32" Stay Clean Colony Whirlpool System with "whirlpool jet tub jets staying" Questions

...Whirlpool bathtub. After I fill the tub with water, I push the button for the jets to start and the jets only work while i am pushing the button. The button is a air button. Feels like I am pushing ...

...seconds. Home inspection working fine I believe put your ear to the side of the tub and momentarily turn on the jet pump, if you hear a humming sound then you need to replace the pump motor

...whirlpool jacuzzi tub with an Eljer inline heater. The pump in the tub is shooting water out all the jets I even blew the jets out with air to make sure they were clear. The first couple of times we ...

...jet 1 hp motor if it needs to be replaced do you have to stay with the same model and hp? What pumps are good for any jetted tub? the button is an air switch, check the simple things first. your tub ...

The on and off button for the Jetted tub was pushed in and it stayed. What should be done to fix it? if you can get to where the motor is..there should be a small plastic hose the inserts into motor..

I pushed in the air button on our pac-fab jetted tub and it stayed in. How do I get it out? outside ring on button turns, just turn and let air in and it shud pop out...

...jets in our tub run if we hold the on/off button but won't stay running once we let go of the button. All air actuation seems to be working properly, the filter is not clogged in any manner, ...

...tub?. This condo was build in 2006 and never occupied as it was the model. However, we have no instructions or warranty information. The jets do not work. The electrician said it was all hooked up ...

...tub. It gets ups to temp but when we get in the temp goes down pretty quickly Does this happen when you're running Jets and/or Air Blower? Using an air blower w/o an air heater or opening all the air ...

...they get worn out the jet face will fall out into the tub. Take a rubber band and wrap the base of the jet so it fits tight then push it into the seat, this worked for my jets on a hydrotherapy ...