Screw on back of iron is loose. standard allen wrench doesn't fit. Probably what they call a torx head. If it has a tip in the center then it will be a security torx head. sets of torx head wrenches ...
...turns on and off when moving the power cable around. Can the power cord be replaced? There are two Torx screws on the bottom but the have a bump in the middle that prevents normal Torx screwdrivers ...
...star-shaped head with a small "post" in the middle of the head so I can't use an allen wrench nor a Torx-screwdriver. How do I remove the screws? What kind of screws are they? on the back-end of the ...
...I can't find a screwdriver that will fit the base so I can open it. it is probably a "tamper-proof' Torx head screw and you will need to get a set of tamper-proof Torx bits. Be certain the ...
...iron ... however, I am familiar with different types of "bits" I suspect yours are security "Torx". Torx look like a "allen" with points. Some call them "star". A Torx 'security' will ...
...iron. What kind of screw driver does it take? Allen wrench doesn't engage. Sounds like a 'TORX' head. Does it look like a 'star' inside the screw head? A six-sided star? If so, ...
Where to get a special torx screw driver, my Rowenta DM866 iron requires a special "hollow" torx screwdriver to open it up for repair of the power cord. you can get them at most auto parts shops
...replace the power cord? Screws have a pattern I've never seen. Rowenta DM880 Iron They are called TORX screws. You need a torx set of
Question about Irons
Do you perhaps have a picture and the name of screwdriver to open an iron? Does it look like a Star? That is a Torx. https://www.google.ca/search?q=torx+screwdriver ..
...cannot open the appliance.....if they are like introverted star shape, then these are called torx screws, can be removed by ordinary torx-bit screw driver, available at most hardware
32 questions posted
Usually answered in minutes!
119 Questions
145 Questions
67 Questions
53 Questions
51 Questions