jets are draining my jaccuzzi tub I filled the tub but as soon as the water reaches the level of the jets, my tub starts to drain itself and it drains my water tank until I only have cold water, how ...
...the water that should be coming out of the jet faces back through the system and out the air control knob if it is open. Just to check. that may not be the case....but...that would be cool if it
went to turn it on We have a new Jacuzzi tub and went to turn it on and the jets didn't work. Any suggestions? check to make sure the pumps on and that its wired correctly and that all valves are open
...and are open and the pick-up is clear ????is this a commen problem check to make sure the jet faces are turned on. some model tubs have adjustable jets that you can turn the face of the jet
Question about Neptune Home
...have a Neptune air tub and the motor turns on when I press on but the air is not coming out of the jets. The tub does not have an air knob I have a Neptune airtub and the motor turns on when I press ...
Question about Home
...check to make sure both valves are completely open on either side of the pump so you have not restricted the waterflow.If the valves are open and the filters are removed and the heat indicator light ...
My Whirlpool ciello only has a 2 prong plug. How do I ground the tub? You can go to any metal part of the tub or electrical part (motor - valve - connection) and fasten a ground wire to that part ...
...jet tub. When I turned the water back on it will just run a very small stream cold or hot and I cannot find a reason for. We have a circulation system to keep warm water at the all the faucets but I ...
22 questions posted
Usually answered in minutes!
