Pulsar 100 Meter Alarm Chronograph PF3277 "minute hour counter resetting" Questions

Can reset the second counter, the minute counter also but cannot reset the hour counter Pull the crown (winder knob) out all the way, zero with the lower button, then push the crown back in. Job done

...minute and hour hands to zero invicta chrongraph won't reset the minute and hour counter to zero pul crown all they way out press top right button to set the minute hand & bottom right button to ...

...minute]. Press the 4 o'clock button to see the timer hours. The timer has a maximum time of 96 hours [4 days] after which the hour/seconds sub-dial counter will stay at 0 and the central timing ...

...minute and hour sticks but not the second(s) counter stick is it a chronograph model? If so, reset the chrono. If not, you are going to have to send it in to a repair shop or the mfr to repair ...

...hour and minute hands at 6 o'clock (they must be lined perfectly in opposite directions) 2) push the crown in half way back (not completely) 3) push and hold the button at 2 o'clock (set the big ...

start stop to set functions, hour, minute etc, press MODE after you have set each function, hour, minute, etc. When done with all functions press mode again to bring the watch back to normal operation

...second pull for the hour and minute.Just do the first pull then wind it clockwise for DAY and the counter clockwise for DATE.Feel free to ask whatever the result... Hope this may help; Regards, ...

...counter and runs only when the chronograph function is engaged. One full circle indicates 30 minutes, two circles = 1 hour. The big centre seconds hand is actually Chronograph hand and runs only when ...

...hour or hold the button in if you have more than a couple of hours to change. When that is done, if you need to change the minutes, push the "reset" button again and the minutes should be highlighted ...

...hour and minute.Just do the first pull then wind it clockwise for DAY and the counter clockwise for DATE. The buttons is for chronograph RESET / STOP and GO thats all the function try to function it ...