Pulsar Chronograph Watch "stop 12" Questions

...to get the second hand stop watch to 12. nice noon ! the hand of watch is need to aline, you need to remove the hand of your watch and fix it again at the correct position ,...thank you ! god bless

...the time signal. Stop the second hand at 12 o'clock and reset the time (taking out the back lash on the minute hand) Start the watch as the stop watch second hand hits 12. Screw down the crown.

...stop at the 12 clock position but instead stops 2 mins before the 12. It stops on the 62 instead of the 60 on the tachymeter. Is there anyway to set it to where it stops at the 60/12 or is it a ...

When I reset my chronograph, the second does not stop at the 12 but stops about 4 tics past 12. pull out the stem to the first or second posistion and use the top or bottom buttons to zero it out.

...12 the chrono push knob when I press to reset do not go to the 12 it stop between the 11 and the 12 pull the crown out to second position press start button till it goes to 12 push crow back

stop and cycle thru all the modes depending what time you want to set - it will go thru 1, 2, 3, etc thru 24 H then 1, 2, 3, etc thru 12 A then 1, 2, 3, etc thru 12 P - depending on thte time you want

...12 oclock stop it at the time in relation to 12 oclock. i.e. if you wanted the watch to read 30 minutes fast then stop the watch at 12.30. if you want any other info my email is; ...

...at 12, it is the second hand of the stop watch, it moves when you press te upper right button and it stop on that button too. when it stops the lower button is the reset. i hope i had been helped

...stop watch' second hand is not in the 12 o'clock possition when i reset it. how can i get it back to the correct possition? if you pull the crown out to the #2 position,then push the start/stop ...