...to get the second hand stop watch to 12. nice noon ! the hand of watch is need to aline, you need to remove the hand of your watch and fix it again at the correct position ,...thank you ! god bless
...the time signal. Stop the second hand at 12 o'clock and reset the time (taking out the back lash on the minute hand) Start the watch as the stop watch second hand hits 12. Screw down the crown.
...stop watch' second hand is not in the 12 o'clock possition when i reset it. how can i get it back to the correct possition? if you pull the crown out to the #2 position,then push the start/stop ...
...hand on the chronometer stop watch does not reset to the 12 o'clock position when you reset the stop watch. How can I manually adjust back to the correct position? Pull out crown to the first click. ...
...resetting to the 1 minute to 12 position rather than 12 o'clock. My instruction book does not seem to cover this watch. The nearest instruction advises there is a corrector which can be pressed to ...
Question about Watches
stop watch is started resets every time to a little past the 1 on the dial opposed to the proper spot at the 0. How can I fix this? Try this: Resetting Chronograph Hands: Note: Some Nixon watches come
...at 12, it is the second hand of the stop watch, it moves when you press te upper right button and it stop on that button too. when it stops the lower button is the reset. i hope i had been helped
...work, push the crown back in. Now pull out crown fully tto the second click and try to manipulate with pushbuttons again. After resetting stop watch hand to 0 push the crown in completely. Job
stop watch hands are not in the "0" (12 o clock) Position, follow the prodedure below to set them to the 12 o Clock position 1, Pull the crown to secound position 2, Press Button "A" for 2 seconds. 3,
48 questions posted
Usually answered in minutes!
21 Questions
10 Questions
6 Questions
4 Questions
7 Questions