Sharp UX-K01 2-pc. Combo Addtional Handsets for UX-CC500 Phone (UXK012PCCOMBO) "power base cordless phone mean" Questions

...Power at Base mean? Hello, Gwen - If you are asking about a cordless land line phone. . . "Out of Range" means the handset has lost its connection with the base station. Cordless phones are actually ...

...power to drain out of the sets, and re-install the batteries. Once all the cordless sets are back up and working, plug in the base station and wait for about 1 minute. This forces the base station to ...

...base power for a few seconds. Plugged the base power back in then plugged each battery back in and everything worked. The pressing the hold button and # at the same time would just go to an "out of ...

...power (when the phone is near the base unit) on the phone are reduced. Naturally this means that less energy is used, which can only be a good thing. - See more at: ...

...set it the hand set says "no service" The light on the base blinks green instead of a solid green. Don't mean to be smug but...make sure the base with the two antennas is plugged in and powered

power was reconnected the phone base initially displayed "Welcome please wait" followed after some time by message E4. Power has been disconnected for some time before reconnecting and unit still ends

...power on the base it is normal that none is functional...make sure you have a power adapter is connected to Base...if no light it means either your adapter is malfunctioned or just it's cable is ...

...can't find the base. Make sure you registered each phone on the base. If you have done this already, and are sure that the baseunit cradle has power, I'd return them as they are probably

...power outage?" me yeah probably we live in the Midwest "Well that particular code means there is a problem with the base that needs repair. You have a one year warranty." great now I got to find the ...

...power failure the memory may have been affected. You may need to register the handset to the base by following the instructions in the user's manual the cl means that the clock needs to be set, the ...