...door switch or loose door switch mount . There are plastic mounts inside the microwave which hold the door switches and onto which the door latches lock when you close the door. The screws on these ...
change. This is usually caused by either a bad upper door switch, a loose upper door switch mount, or occasionally a problem on the control panel. Even though a door switch clicks, it may still be bad
...not change at the correct time when closing nthe door the fuse blows microwave goes on but doesnt heat any thing Tell me how this apprentice's comment could possibly qualify as the best solution?
Question about Kenmore Microwave Ovens
door switches with small 3/16 terminals and small undersized wires going to them so they get how and melt the plastic body of the switch and it causes a back feed of voltage when it is not supposed to
...runs when door is closed when you close the door the light and fan comes on but no heat. I changed all the door switches , and it did not fix the problem 1.check fuse 2.check relay
...door switch, How do I program the computer to not beep? Hi, the door switch might have had liquid poured on it freezing it, or the switch itself is bad. Unplug your refrigerator from the ac outlet, ...
Question about Whirlpool Microwave Ovens
...door shut, as I expected. Does that mean the lower switch is bad? Can a switch "change polarity" like that? Also, can I test to see if the problem is the lower switch by hooking it all back ...
...change the door switch in your Frigidaire microwave. Typically, this is not a do it yourself repair, as there are no step by step instruction manuals. I suggest, especially when dealing with your ...
Question about Maytag Microwave Ovens
...change a bad door switch and/or door switch mount on a Maytag Model MMV5208WS1? Microwave will not operate and reads "OPEN AND CLOSE DOOR" when attempting to do so. Take off the control panel to do ...
Question about Magic Chef Microwave Ovens
...change the fuse in his. Get a professional to check it. The most likely cause is either a bad door switch, or a switch sequencing issue. The three, or more, door switches must open/close their ...
36 questions posted
Usually answered in minutes!
275 Questions
129 Questions
117 Questions
86 Questions
95 Questions