Sharp R-1480 Microwave Oven "remove carousel" Questions

...remove from sharp carousel 1993 r-1420b, how to remove from wall, has no screws in top cabinet or side ones.? One of these installation manuals may be close enough to yours to help you: manual 1 | ...

...carousel? You should be able to access the turntable motor if you remove the left side filter under the microwave. Disconnect the power, remove the left filter and look up inside that area, the motor ...

...carousel my removing this glass plate. (see pg 4 of the manual - above link) You can place a normal microwave safe plate in the microwave in it's place. Make sure to leave the rollers in place...just ...

how do i remove the display on a sharp carousel microwave in order to get roaches out? Take of the main cover and turn upside down and give it a good shake to clean out.

...carousel microwave oven that stopped turning on, is there a reset button I don't know of a reset button but there is a fuse that you have to remove the outer cover to get to that has a habit of ...

...carousel The part your going to want is called a stirrer motor.This is a DC motor that causes the glass to turn inside the microwave, and also helps distribute microwaves inside the machine to help ...

Remove the turntable, and then reposition it into the carousel grooves. Motor The carousel motor is located beneath the base plate of the microwave. If the carousel isn't turning at all, check the

...When the door was closed it seemed to stop running. This is all without setting it to run. I removed the cover over the carousel motor and didn't see anything unusual. Oddly when I turned the ...

carousel itself, is the small ring that the tray sits on. If the motor is not turning, it can easily be replaced. You will need to remove the bottom panel (under the microwave) to access the motor and

Arcing sparking to carousel wheel. have 8 year old GE advantium 120 microwave oven. Was working just fine with a burnt out lightbulb but when I replaced the over head lightbulb it started to arc to ...