Sharp R-1610 Microwave Oven "plastic piece used door" Questions

...plastic piece that holds the spring which is attached to the $80.00 piece called outer door. To fix it, it is EASY and you do not have to even take the inside cover all the way off. Just remove the ...

...piece of plastic and then epoxied it in, and haven't had any more problems with that. Another problem I've had with the sharp (that just reoccured, I'm trying to figure it out) is that the ...

...plastic. Insert the pinned piece into the newly drilled hole checking for alignment, if it looks close enough you can glue it in place and you should have a strong enough repair. Dangerous to use a ...

...plastic probably performs no role in stopping the microwave radiation. If so, any epoxy probably can be used to close the hole safely. Make sure you don't use too much and if possible place tape over ...

plastic of the door on the other side; there are simple tabs that hold it in. You're just gonna have to carefully feel around until you get an edge up. Then another. Once you get it going you'll be OK

plastic piece broke off where the door latches. I thought about using some really strong glue to glue the piece back on. I believe without it the microwave won't cook. The timer functions all work

they hold the inside plastic piece on , but they also hold the whole outer stainless/ glass/ handle piece on. It just slips in at the bottom, so be ready to slide it out when you take these screws out

...so the door opened. You can remove the front panel and check for broken plastic or nylon pieces which can be glued using instant adhesive. Reset the lock and switch and the door must lock in ...

...plastic. Insert the pinned piece into the newly drilled hole checking for alignment, if it looks close enough you can glue it in place and you should have a strong enough repair. Dangerous to use a ...

...plastic piece that holds the spring which is attached to the $80.00 piece called outer door. To fix it, it is EASY and you do not have to even take the inside cover all the way off. Just remove the ...