HOW TO REPLACE THEROSTATE MODEL 135.135.13 135 LITRE DATE OF MANUFACTURE 10/2000 TWIN ELEMENT Twin element indicates you have 220-240Volt electric water heater.Brand unknown.135 liter implies European
I have a 135 litre, 10 year old Rheen mains pressu... I have a 135 litre 10 year old Rheen mains pressure hws fitted externall to the home. The flow rate from the hot water tap is getting slower and ...
...above 120 degrees? How do you set the thermostat above 120 degrees? My dishwasher requires 135 degrees. Thank you. you shouldn't have to set your heater to 135. dishwashers have a built in ...
...Usually these water heater arrive with default setting at 110. Setting to 120 is reasonable. 135 gets very hot: Copy following links: ...
Pop off valve releasing water. House pressure between 50 and 60 lbs. Plenty of hot water, set at 135 degrees. Not a lot of water but still release water regularly. A build up of minerals in the water ...
...screw on an arrow and dial. Factory settings are at 120% for residential heaters. Reset to 135% is hot but it will not scald anyone. Higher temps are dangerous especially to those used to
THERMOSTATE REPLACEMENT ON HOME HOTWATER CYLINDER MODEL 135.135..13 135 LITER TWIN ELEMENT in big water heater therostat is at below/down side where the inlet/outlet connection are seen.before doing ...
...heating/energy-conservation. If household uses more hot water, then move upper thermostat to 135 for example, and leave lower thermostat at 120. ...
Question about Bosch Water Heaters
How do I drain the water from a Bosch W135-9 water heater? you dont drain theses type water heaters Does it have a trim kit installed? if no drain tap installed in your lines then need to turn off ...
320 questions posted
Usually answered in minutes!
335 Questions
250 Questions
222 Questions
190 Questions
96 Questions