Rheem 40 GAL ELEC TALL Water Heater 6YR SC 82VH402 "dip tube" Questions


dip tube size and length and type of end for Rheem PVW50 water heater All dip tubes on water heaters smaller than 75 gallons are 3/4" male pipe thread to screw into the heater. As for length, go to a ...


dip tube? Cold water comes n on the side of the tank not on top or bottom. How to Repair or Replace Defective Water Heater Dip Tubes www.familyhandyman.com > Skills > Plumbing The role of the dip tube


Question about Honeywell Water Heaters

2 Answers

...dip tube to make sure it is still intact. The dip tube directs incoming cold water to the bottom of the tank and the hot water is tapped from the top of the tank. If neither of those turn out to be ...

Question about Rheem Water Heaters

2 Answers

...dip tube in my RheemPowerVent water heater but I can't for the life of me figure out how to get the old one out. The treaded metal cold water nipple is screwed into a circular plate so I assume this ...

...Dip Tube? Hot water is only at just below top as cold water is entering tank also at top! The dip tube us supposed to direct the replenishing Cold water TO the Bottom! Broken dip tube, does not allow ...

Question about Reliance Water Heaters

1 Answer

dip tube. The dip tube is connected to cold water inlet and runs to bottom of tank. So all cold water enters bottom of tank close to the gas water heater thermostat. See illustration of dip tube, that

...runs on full You either have failed heating elements, or your dip tube has corroded and deteriorated. check out this link, and review that site. Very and highly informational. Waterheater dip ...

Question about Rheem Water Heaters

1 Answer

dip tube water is Luke warmpilot light is lit burner is coming on suspect dip tube Copy following links: http://waterheatertimer.org/Water-heater-dip-tube.html ...

Question about General Electric Water Heaters

1 Answer

dip tube is broke If the dip tube is broken you will only get luke warm water as the incoming cold water mixes with the hot water that is already in the tank. The cold water is usually fed through the

...dip tube will come out as one piece so the tube will be needed also.You can make a new dip tube by FLARING a piece of 5/8"copper at one end and use a BRASS 3/4" stock nipple as an OEM ...

Not finding what you are looking for?
Rheem 40 GAL ELEC TALL Water Heater 6YR SC 82VH402 Logo

359 questions posted

Ask a Question

Usually answered in minutes!

Top Rheem Water Heaters Experts

Brad Brown

Level 3 Expert

18523 Answers

Bill Johnson

Level 2 Expert

306 Answers


Level 3 Expert

747 Answers

Are you a Rheem Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides