...hot water system set to 55 degrees with remote temp adjuster. Water only luke warm for showers. Burnner working, water & gas pressure ok. Any thoughts ... Stephen If you aren't getting any error ...
hot water not as hot from rain head as other outlets i'm quite sure you shower valve has an adjustment on handle that allows more hot water into the mix,........it will tell you how in the paper work ...
...solved, if you have really hot water to some taps, then turn down thermostat to avoid scalding. http://waterheatertimer.org/How-to-adjust-temperature-on-water-heater.html Add a comment for more
...hot water supply. Have a plumber inspect your pipes and repair any leaks. Adjust the temperature settings: Make sure the temperature settings on your water heater are properly set. If the temperature ...
...hot then slowly adjust to cool and see if you maintain a good MIX for proper temp. If it goes cold again try this......LOWER control pad setting to a comfortable 105 degrees (ladies) 100 degrees(men) ...
...open, and anything else in between, shut off. Have you actually tested a cup of hot water from tap to see what temperature it is? I just don't see both thermostats as being faulty at same time,
...to the faucets {house} side, if it had the know on top you can adjust it, look on it it will have arrows on it saying hot-cold turn to the cold side, if not you may need to replace the mixing ...
...water flow How do I set the flow on the shower vavle...hot/cold mix? if you are using a mixing valve it is pre set so as to not burn your self but if you wish to set it on the dial depending on which ...
...hot water line. If those check out ok...then the mixing valve is likely clogged, you could take it off and try soaking it in boiling white vinegar, or try to adjust it, there is an adjustment screw ...
19 questions posted
Usually answered in minutes!
226 Questions
77 Questions
78 Questions
