PC Chips M825G Motherboard "remove cpu" Questions

cpu How to remove the CPU from motherboard THERE WILL BE A PUSH LEVER , JUST LIFT IT SLOWLY , THEN REMOVE YOUR CPU FAN AND NOW SLOWLY REMOVE THE CPU BY HOLDING ITS SIDES

...Remove the CPU fan and CPU. Look at the top of the CPU, if you have a crust over the top of the CPU, you will need to remove it to a clean surface. Next, your CPU fan should be a 3 wire connection on ...

...remove the CPU's cooling fan for a star.I now have it and still can not remove the fan so I can take a peek at the CPU..Any suggestions before the hammer comes out. To make matter more complicated I ...

remove the cpu with your fingers by the edges. place it in a safe location, and go ahead install the new cpu. optionally apply some thermalpaste and attach the heatsink and the power connector for the

at power on with the cpu removed the system and cpu fans run, with the cpu fitted the power will not come on, i have tried replacing the cpu removing memory etc try a different psu

...remove the cpu There is no lever to lift on the mobo. Is there any kind of lock on the inside of the board? This wood meen I have to remove the board from the case? What a job! Thanks... Hi, You will ...

remove the cpu fan, Check for Dust Blockage, remove CPU. And re-seat-seal-replace Fan. ( re-boot ) remove power from Case ( mains power ) remove side panel, locate CMOS Battery ( Silver coin-Cell ) On

...of the CPU heatsink/fan the system will power on. When I release pressure, system shuts down. I removed heatsink/fan, removed old thermal grease using Isopropal alcohol. I removed CPU, checked ...

remove the CPU (careful of static!) and examine the bottom carefully to make sure nothing looks damaged. If it looks normal I would try reseating the CPU slowly and carefully. In your question you did

...remove everything but the video card , CPU, and fans.......Now it should post (if all your jumpers are set correctly........... IF it still doesn't post, remove the video card and reboot. If it ...