Air Supply Captive Aire ND-PSP-18SS Exhaust Hood with Front "micro hood" Questions

...Micro Switch If the range vent hood fan and light are not working the micro switch might not have continuity. The best way to test the switch is with an Ohm meter. See our switch testing videos for ...

hoods is 4 ft and the other 1 is 8 ft Google exhaust hood micro switch there are several diagrams.You want the exhaust to turn on and the make up air.electricial under the hood and the gas to turn off

...inner workings. Carefully, insert a small sharp object into the unit at the point in which the micro-switch(es) are exposed. The micro-switch(es) will appear as small little plastic tabs that

...micro hood 721.80033700 shorted out My light bulb burned out. When I went to replace it, the glass of the bulb had broken off. As I turns the metal part of the bulb, sparks flew. I turned off the ...

...hood are gas which will be shut off mechannically. If possible, could you please supply me with a electrical and a mechanical diagram for the electrical and gas shut off. Basically I need to know how ...

over the range microwave My micro works and does everything it is suppose to do but heat up. Next to the time it shows a "d" example- 7:15 d I can set the microwave to defrost etc but it just doesn't ...

ice maker water overfills micro-switch is frozen or stuck if frozen defrost it if stuck wee if you can free it otherwise your gonna need a repair-man to replace the ice-maker.

hood does not pop up when depressing the push button is there a reset button on the kitchen aide The filter elements are mostly likely not correctly in place so the latch is not tripping the ...

...on the bottom. To increase the efficency make sure that you duct it to the outside. If you want to keep your micro/hood vent you will have to boil on the back burners, it is the nature of the

...hood is in the down position. Unplug the unit from power(important!). Unscrew the screw that connects the drive arm to the drive link. Unscrew the motor/control cover, then unscrew the 4 screws ...