CROWN-STEM WILL NOT STAY IN PLACE I recently had to replace a broken face on a friend's women's Morellato watch. The crown stem was released by loosening a screw on the movement casing, but ...
...replace stem AND crown (the metal filling the hub is the broken end of stem). In case if the crown still in tact, let me know by asking questions and I'll guide you through all the process HOW TO. ...
...crown onto the stem replace stem, replace back. I have problem to pull out the crown, it can be pulled out 1 step to adjust the date and another step to adjust the time. I can not pull it out ...
...you will need to unscrew the crown before it will pull out. Make sure you replace the crown and screw it back down for a good protective seal. The alarm sets the same way. Unscrew the button to
...pressing crown back in. If it's a screw - back the screw off about 1 1/2 to 2 turns, press crown back in and tighten screw again. Check operation of winder in all positions before replacing case
Question about Watches
...cannot get the chrono hands back to top dead center? It's a Fossil chronograph model CH 2646 pull the crown out to second position then press start button till it gets to top then push crown back ...
...crown from my Timex indigo watch so i can replace a digit that had come loose from the face. So far I have removed the case back. The movement is now loose but is prevented from being taken from the ...
...crown back in place. If you missed the time, pull the crown back out and twist backwards. The minute hand will move slowly in reverse. If you twist hard and fast, the minute hand will start spinning ...
...spring loaded so you need a little pressure if you dont it wont be water resistant.. Sounds like the crown stem thing may be broken. Same happened to me and they had to replace it at a cost of ...
42 questions posted
Usually answered in minutes!
64 Questions
56 Questions
41 Questions
34 Questions