Question about Lionel Crafts & Hobbies
a whirling sound from the transformer that never stops. Is that appropriate? Yes, I think so. It is connected via a rectifier diode to the transformer 18V output
transformer power to connect to the train power. Answer a number of questions: Is the tranformer power adequate for the train and is it a working tranformer? Will the train run by connecting the wires
...setting up HO trains using new Bachmann ez track. I am using an older non-modular transformer. Do I connect the turnouts to AC or DC on the transformer? I believe trains use DC and accessories use
Question about Lionel Crafts & Hobbies
no voltage on the red terminal to power up the track. open'd up unit looking for broken on loose connection but found none. Check the primary and secondary windings with an Ohm meter to determine if ...
...WORKING on CW-80 The whistel just stopped working on the CW-8o transformer. Any suggestions all connections are snug and working. The direction button works without issue. replace the button with ...
how do i wire the transformer? there are four how do i wire the transformer? there are four connections on the transformer, and only three connestions on the track. ther will be four wires but they ...
...Green light on, But flashing and the train don't move I have a lionel tranformer 190 watts i know connections u and a and u and b go to my tracks but i have know idea where c an d connet to can u ...
...no horn. Now only the transformer will activate the bell. The sound button does nothing. All wiring connections seem to be okay. Any ideas? Make sure the A or D terminal is connected to the center ...
Question about Crafts & Hobbies
...then one track path , track insulators need to be installed at "ALL" points that track may cross connect with eachother (switches) or the two powerpacks will "compete" and the most powerful one ...
Question about Lionel Crafts & Hobbies
...power to the transformer or to the track? If not to the track, make sure you have the correct wire connections made from the transformer to track. If no power to the transformer from the wall plug, ...
15 questions posted
Usually answered in minutes!
33 Questions
31 Questions
10 Questions
6 Questions