Good luck on finding any piping information, even from the MFR for that. Your best bet is to remove the access panels where the fresh water inlet connects to the camper and distributes throughout the unit. Typically, the connection will be near the hot water heater then once inside, there will be a "T" connection where the water will split off to the Hot Water Heater. After that, you should see the water go back towards the wall to go through a bypass valve, which is the lever used to bypass the tank fill or direct the water into the tank fill. This is where is can get difficult to find. Many 5th wheels will have the fill line go into and behind panels that are not easily accessible or they get directed under the camper where you will have to remove belly skin panels to be able to trace.
At each one of these areas where there is a connection or corners, have someone outside turn water on/off to prevent excessive water spillage and keep any water from getting inside your unit to get soaked into wood and carpeting.
guessing here
one would be to the fresh drinking tank
leaves two to choose from
does the RV have two types of taps ?
how many water tanks on this model ?
have see one layout with chemical toilet and normal house taps at its sink
or kitchen sink with multiple taps
You need to get to the motor and see if there is power going to it in both directions. Does it sound like the motor is running but nothing moving?
255 views
Usually answered in minutes!
×