Zongshen FVision 125 - Recent Questions, Troubleshooting & Support


Hi, Rob, you need to repost your question under the Generator category, not Motorcycles. Thanks, Gregg

Zongshen FVision... | Answered on Jan 04, 2020


Hi, Sandra for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNTx9-xtg64uSxwBE2GDkgtNF68-_A:1578115213876&q=WIRING+DIAGRAM+ZONGSHEN+50&tbm=isch&source=univ&sa=X&ved=2ahUKEwjyjvOlmenmAhWDjFkKHSivDSQQsAR6BAgKEAE&biw=1440&bih=757
http://ead.faveni.edu.br/zongshen-50cc-wiring-diagram.pdf
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/brand/zongshen/

Zongshen FVision... | Answered on Jan 04, 2020


Hi, Slim for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.miniriders.com/threads/zongshen-155z-ho-big-problem.36107/
https://www.youtube.com/watch?v=hRXNM3ygvpk
https://www.motorcycle-manual.com/zongshen/
https://www.scooterdynasty.com/partsbyenginetype.aspx
https://absolutelyscooters.net/pdf/CGEN_dawg_scooter_manual.pdf

Zongshen... | Answered on Mar 18, 2020


Hi, Rebelbornjrj for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNSoIhJ_7z0UaKVrbUImJxukG9er4w:1578119443073&q=Fuel+line+routing+2006+Zongshen+250&tbm=isch&source=univ&sa=X&ved=2ahUKEwiC6MSGqenmAhUPVN8KHTeuCDAQsAR6BAgJEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=XkH2dEY8nRg
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

Zongshen... | Answered on Jan 04, 2020


Hi, Moonlithoriz for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNT_0uYpQuv9WATxAnMQT-fMg67hMQ:1578119213740&q=Wiring+diagram+2007+Zongshen+Hummer+250&tbm=isch&source=univ&sa=X&ved=2ahUKEwi4qJeZqOnmAhUSrVkKHcsbDgIQsAR6BAgKEAE&biw=1440&bih=757
https://atvconnection.com/forums/1-engine-problems/350164-kl-250-zongshen-250-needs-wiringdiagram-lynn.html
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

Zongshen Arte... | Answered on Jan 04, 2020


Hi, Elchleonrd for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNRrV6_SlgpW0qZAIjDA4Lj9MUK_LA:1578118962139&q=Oil+drain+plug+location+2006+Zongshen+GS+250&tbm=isch&source=univ&sa=X&ved=2ahUKEwjZ9pqhp-nmAhVDx1kKHVV2DjsQsAR6BAgJEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=Q8SDco3xPls
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

2006 Zongshen GS... | Answered on Jan 04, 2020


Hi, Chadmccord before testing any electrical component in the Charging System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
2. To check the regulator unplug it from the stator. Take a test light and clip it to the negative terminal of the battery and then touch first one pin and then the other on the plug that goes to the regulator. If you get even the slightest amount of light from the test light the regulator is toast.
To do this with a meter: black lead to battery ground, red lead to each pin on the plug, start with the voltage scale higher than 12vdc and move voltage scale down in steps for each pin. Any voltage is a bad regulator.
3. On the other part of the disconnected regulator plug. Set the multimeter for Ohms x1 scale and measure for resistance across the pins of the stator. You should read something around 0.1 to 0.2 ohms for a 32 amp system.
4. Then check for continuity between each pin on the plug and frame/engine ground. The meter needle should not move (infinite resistance)(digitals will show infinite resistance) if the meter needle does move (indicating continuity)(digitals will show some resistance), recheck very carefully. If the meter still shows continuity to ground the stator is shorted (bad).
5. Set the meter to read A/C volts higher than 30 volts (the scale setting for voltage should always be higher than the highest voltage you expect or you may fry the meter). Start the bike, and measure from one pin to the other on the plug (DO NOT cross the multimeter probes! - touch them to each other). You should read roughly 16-20 vac per 1,000 rpm.
6. If the battery was good under load test, if the stator is NOT shorted to ground, and the stator is putting out A/C voltage, then the regulator is bad (most likely even if passed step 2)
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.miniriders.com/threads/zongshen-250-required-battery-amps-and-charging.39821/
https://www.youtube.com/watch?v=44hLjPBObYw
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

2006 Zongshen GS... | Answered on Jan 04, 2020


Hi, Shari_keller for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.ebay.com/b/Motorcycle-Electrical-Ignition-Parts-for-Zongshen-GS250/179853/bn_51207477
http://www.motopartscenter.com/Zongshen_250cc-dirt-bike-spark-plugs-c-5903.html
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

2006 Zongshen GS... | Answered on Jan 04, 2020


Hi, Frans_moffat you need to repost your question under the Jonway category, not Zongshen. Thanks, Gregg

Zongshen Arte... | Answered on Jan 04, 2020


Hi, Lil_ktown_ba and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Improper valve clearance (too tight)
17. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
18. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
19. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
20. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
21. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
22. Faulty neutral, clutch, kickstand safety switch.
23. Faulty fuel pump or fuse or relay.
24. Faulty or corroded run/stop switch.
25. Tilt sensor needs a reset.
26. Security system not disarming alarm needs a reset.
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.chinariders.net/showthread.php?t=16918
https://www.motorcyclecruiser.com/what-to-do-if-your-motorcycle-doesnt-start/
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

Zongshen 985 C3... | Answered on Jan 04, 2020


Hi, Allister_mey for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.cscmotorcycles.com/check-out-our--tt250-clutch-cable-installation-and-adjustment
https://www.youtube.com/watch?v=diF4XN0OxMI
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

2006 Zongshen GS... | Answered on Jan 04, 2020


Hi, Nathan you need to repost your question under the Wolf category, not Zongshen. Thanks, Gregg

2007 Zongshen... | Answered on Jan 04, 2020


Hi, Allan for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.planetminis.com/threads/z155-valve-clearance-trouble.199276/
https://www.youtube.com/watch?v=C2qjTyThQ_8
https://www.ooracing.com/haynes-service-repair-manual-pit-bike.html
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/brand/zongshen/

Zongshen... | Answered on Jan 04, 2020


Hi, Wesley for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNRYX0QHYz17jrjSqE60-zPjSeF_tQ:1578117300762&q=Cam+timing+Zongshen+250&tbm=isch&source=univ&sa=X&ved=2ahUKEwj-vICJoenmAhXIx1kKHUuUBAcQsAR6BAgJEAE&biw=1440&bih=757
https://www.chinariders.net/showthread.php?p=163084
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/manual/963640/Zongshen-Zs250gy-3-Efi.html

Zongshen AS 250... | Answered on Jan 04, 2020


Hi, Robert for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.cscmotorcycles.com/check-out-our--rx3-valve-adjustment
https://www.youtube.com/watch?v=ygfESBBUjAA
https://www.manualslib.com/manual/1517513/Zongshen-Zs125-80.html
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/brand/zongshen/

Zongshen Arte... | Answered on Jan 04, 2020


Hi, Allenotunga for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.ebay.com/b/Motorcycle-Parts-for-Zongshen-ZS250/10063/bn_22405849
https://www.google.com/search?sxsrf=ACYBGNRrJeza_TA_y4dg1VxwtWnuphBR9A:1578116893655&q=Replace+the+mirrors+2007+Zongshen+ZS250&tbm=isch&source=univ&sa=X&ved=2ahUKEwjv4PDGn-nmAhUEqlkKHTNiCyEQsAR6BAgKEAE&biw=1440&bih=757
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/brand/zongshen/

2007 Zongshen... | Answered on Jan 04, 2020


Hi, Jose for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.chinariders.net/showthread.php?t=4960
https://www.youtube.com/watch?v=c1_GFGxky4g
http://www.mychinamoto.com/downloads/LZX200GY-2EC-Manual.pdf
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/brand/zongshen/

2006 Zongshen... | Answered on Jan 04, 2020


Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. A faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.chinariders.net/showthread.php?t=10176
https://www.youtube.com/watch?v=Q3juDBTurvw
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/brand/zongshen/

2006 Zongshen GS... | Answered on Jan 04, 2020


Hi, Thereaper843 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Zongshen, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.chinariders.net/showthread.php?t=14381
https://www.youtube.com/watch?v=9c0CO-iUw7E
https://www.manualslib.com/manual/1548777/Zongshen-Zs250gy-3.html#product-ZS250GY-3
https://www.scooterdomain.com/chinese-parts/by-brand/zongshen
https://www.manualslib.com/brand/zongshen/

2006 Zongshen... | Answered on Jan 04, 2020

Not finding what you are looking for?
Motorcycles Logo

Popular Products:

-3 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Zongshen Experts

Joseph Coppeto
Joseph Coppeto

Level 3 Expert

360 Answers

Tom Chichester

Level 3 Expert

55960 Answers

Terry
Terry

Level 3 Expert

11377 Answers

Are you a Zongshen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zongshen Motorcycles

  • Forum

View Most Popular

  • Zongshen Motorcycles
Loading...