SOURCE: 2008 Yamaha YZF-R6 turn signal wiring harnes
sorry.. i don't know off the top of my head but super simple way to check.. get an electrical tester that pierces the wire and turns on a light.. ($5 at walmart--seriously) turn on left signal, check the wires.. the one that is flashing is your left signal... so on and so forth..
(this tool will be super handy in the future also)
:)
SOURCE: do u have schematics for a 2000 yamaha yzf-r6 i
Go to this site and you can download a free PDF service manual. The site may take up to 20 seconds to load the complete list of 1300+ manuals. www.carlsalter.com/motorcycle-manuals.asp Most all of the manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language. Below is what is available for an R6. Even if the years don't match exactly, the schematic will be 98% the same.
SOURCE: How can i get de diagram of the CDI for yamaha yzf
There are a few manuals at this site (freebies) , you should find what you want:
http://www.carlsalter.com/motorcycle-manuals.asp
SOURCE: ineed a wiring diagram for 2008 yamaha yzf r1
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
SOURCE: 1999 YZF-R6: Yamaha YZF-R6 1999 Clutch feels very stiff. Does t...
THE OPERATION OF THE CLUTH ON HIS MODEL IS OF CABLE TYPE, IF THE CLUTCH IS OPPERATING CORRECTLY THE 1ST THING TO CHECK WOULD BE THE CABLE, REMOVE THE CABLE YOU SHOULD BE ABLE TO PULL THE INNER WIRE SMOOTHLY TO AND FRO, IF YOU NEED TO USE ALOT OF EFORT TO DO THIS THEN YOU WILL NEED TO REPLACE THE CABLE,MAKING SURE YOU HAVE ADEQUIT FREE PLAY AT THE LEVER WHEN RE FITTED. OBSERVE THE ROUTE THE CABLE TAKES BEFORE REMOVAL AND REPLACE IN THE SAME WAY, YOU MAY ALSO TRY TO GET SOME LITE OIL DOWN THE CABLE, THOUGH I SUSPECT THIS WILL BE ALMOST INPOSSIBLE IF IT IS THIS TIGHT TO OPPERATE
1,755 views
Usually answered in minutes!
×