Question about 2003 kawasaki ZRX 1200 R
How do I replace the rear brake pads on 2003 ZRX1200? @
SOURCE: replace rear brake pads
Remove right saddlebag, pull the two caliper mounting bolts and remove the caliper. Do not open bleeder or disconnect line. You will need to push a large screwdriver between the old pads before removing them in order to push the pucks back into the caliper or the new pads will not spread enough to reinstall. Then pull the two smaller bolts from the caliper and the pads will fall out. The pads are different for inside and outside, so pay attention, and remember, after reinstalling, before riding, be sure to pump brake pedal, and it may take a few stops before brakes stop as effectively as before.
Posted on Nov 10, 2008
Remove the 2 break bolts that hold the break to the bracket. Remove the pin covers on the side. <2 flat heads> Remove the Alan key pins and old pads will come out. Use a c clamp and a rag to compress the caliper piston. replace break pads pins and pin covers. Re bolt the break to the bracket. pump breaks till stiff. open bleeder. pump twice and close during pump. clean up and enjoy ;D
Posted on Jul 08, 2009
Tips for a great answer:
Jul 02, 2011 | 2003 kawasaki ZRX 1200 R
633 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: